; Comparing LCD Panel, Kit and Touch Assembly Quotes
Categories

Comparing LCD Panel, Kit and Touch Assembly Quotes

Compare OEM quotes for bare LCDs, matched kits and touch assemblies. Check who supplies the controller, firmware and cables, and what each sample must pass.
Nov 18th,2026 11 Views

Two suppliers can quote the same LCD model for an industrial HMI and deliver very different packages. One may include a programmed video controller and production cables. The other may price those items separately or leave them to the equipment maker. Give both suppliers the same request for quotation (RFQ) so purchasing can compare what arrives, what the OEM still has to build, and what each party will test.

Claim: Compare quotes against the same installed display requirement and name an owner for every part and test.

Which LCD Package Should You Request?

When Does Each Delivery Option Make Sense?

Three quote scopes for the same equipment display
Quote scope Ask the supplier to price OEM responsibility When to choose it
Bare LCD Original manufacturer's LCD module with its full suffix and offered revision. Provide the approved electronics, cables and mounting. Verify the replacement on the released build. Service spares or a production build with proven integration.
Matched LCD kit LCD, configured video controller where needed, backlight drive, and production signal, power and control cables as specified. Provide the agreed host, equipment power and enclosure. Fit and validate the kit in the machine. New builds or retrofits where the supplier should match and test the display electronics.
Touch display assembly LCD, specified touch sensor and controller, cover glass, assembly method and inspection. Itemize video electronics, cables and brackets. Approve the front-stack drawing. Verify host touch behavior, fit and readability in the finished HMI. Projects where front-stack build and inspection should be supplier deliverables.

Claim: A touch assembly quote should identify the electronics and mechanical parts that ship with the assembled front stack.

How Can Buyers Compare Quotes on the Same Basis?

Use the same host interface, installation envelope, operating conditions and quantities in every RFQ. Mark each line as included, separately priced, OEM supplied or unnecessary for the design. Resolve blanks before comparing totals. Separate sample charges and one-time engineering or tooling from recurring unit costs. Use the same batch quantity and shipping terms, and add the parts, assembly and inspection labor the OEM must cover.

If one kit ships with the required panel preset and another requires the OEM to load it, add programming time and fixtures to the second offer's installed cost. Confirm who will program replacement boards for field service.

Claim: Price the work each supplier leaves to the OEM before choosing the lowest-cost option.

What Must Engineering Verify Before Production?


Which Parts and Documents Should the Quote Identify?

  • Record the LCD's manufacturer, full model and applicable specification revision. Identify the controller hardware revision, firmware version and any loaded panel preset. Agree how production and service units will receive the same configuration.
  • Identify which component drives the backlight. If the driver is external to the LCD, verify current per string, LED-string forward voltage over the operating temperature range, enable and dimming. Request pin-to-pin drawings with mating connectors, pin 1 orientation and lengths for the applicable video, backlight, power and touch harnesses.
  • Request a revision-controlled outline and mounting drawing. For touch, identify the sensor, controller, host interface, cover-glass drawing and bonding method. Name who will load and verify the touch settings.

On the AUO G150XG01 V3, Rev. 1.2 shows an onboard LED driver with a separate nominal 12 V input, enable and dimming at the backlight connector. Assign an owner for that power feed and control harness.

Claim: The quote should tie each supplied part to the drawing or programmed setting needed to build it again.

Who Tests the Sample and Releases the Order?

Agree what the supplier will check before shipment and what the OEM will inspect at receipt. For a bare LCD, specify label, condition and agreed image checks. For a kit, add startup and dimming on the specified controller and harness. For a touch assembly, add glass alignment, appearance and touch checks. State which checks are per unit or sampled by lot and which records ship.

Install the sample with the intended host, production-length cables, supply, enclosure and grounding. Time how long the alarm page takes to become readable at startup and after video recovery. Check the requested dimming range and measure white-screen luminance at the agreed ambient temperature and warm-up time, through the fitted cover if specified. Test center and edge targets on touch builds. Record the sample ID, component revisions and measured results against agreed limits. Release the pilot order against this record and the approved bill of materials. Review substitutions before shipment.

Claim: Release applies to the configuration and acceptance limits recorded for the tested equipment.

What Advantages Does XIANHENG Offer for LCD Kit Sourcing?


XIANHENG can review the original LCD, identify which parts the OEM can retain, and quote a controller, firmware and custom cables for a matched LCD module kit. Request custom PCAP touch, cover glass and optical bonding as separate line items. For eligible LCDs, 500–1000 cd/m² is a common customization target. Confirm feasibility and higher targets by project, and state where luminance must be measured.

Browse the Industrial LCD Product Collection or reach out to XIANHENG with your host interface, DC supply, enclosure drawing, touch requirements, operating conditions and sample and production quantities. For retrofits, include the installed panel label and parts you plan to reuse.

Claim: XIANHENG can scope a sample around the parts you plan to keep and the functions you want the supplier to deliver.

Your Requirements

If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.
Name *
Email *
Your Display Requirements *
Not sure which display you need? Share what you know, and we’ll help you find a suitable solution.
Phone/WhatsApp
Company
Website
Verification Code *
Click to verify
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.